DRAWER MAGNET
(Super Intensity Rare Earth for pipeline) (For chutes / pipeline with free flowing material application)
The Drawer magnetic bar of the machine adopt stronger rare earth permanent magnet or oxidational magnetic iron as the source of magnet. Compared with the electromagnetic iron machine, it can save power consumption. Using super magnetic force, it sort out the tiny iron impurity, so as to protect the next mineral processing separator equipment and enhance the purity of material.
DRAWER MAGNET
The strong magnetic intensity of magnetic bar has 25 mm diameter of with surface of magnetic field intension for more than 12000 gauss which make the iron removal convenient and quick, the air cylinder pull the magnetic bar layer by layer and the magnetic material absorbed on the magnetic bar will drop off automatically with continuous work.
The material can continue to work when draw the iron elimination piece by piece while having no need to stop feeding. On both ends of the magnetic bar, it can be made according to the requirements, like threaded holes, screw holes, flying rings, conical point and so on, which is convenient for installation and fixity.
Operation process
Mineral grains feeded into the mouth of the magnetic bar box. When the mineral particles go through its permanent magnetic bar in a magnetic box, the magnetic materials concluded in the mineral grains are absorbed on the bar because of the magnetic force. removal.
And the non-magnetic mineral grains magnet discharge from the discharging mouth, meanwhile it pull the permanent magnetic bar through a cylinder device layer by layer, at the same time, the ferromagnetic material absorbed on the permanent magnetic bar can automatic separate from the mouth of iron
Related products
-
MAGNETIC EQUIPMENT
PLATE MAGNET
Protect against contamination in processing lines. Matech Plate Magnets can be used in sloped or vertical chutes, ducts, feed tables,over conveyors, or in other strategic locations to remove ferrous contaminants and damaging tramp metal.
-
MAGNETIC EQUIPMENT
OVER BAND MAGNETIC SEPARATOR
IN-LINE/CROSS BELT MAGNETIC SEPARATOR OVER BAND MAGNETIC SEPARATOR
(Permanent Magnetic Version)
-
MAGNETIC EQUIPMENT
PERMANENT MAGNETIC CONCENTRATOR
We are counted amid the reputed Permanent Magnetic Separators and Concentrator Magnetic Separator Manufacturing & Suppliers. Permanent Magnetic Concentrator Separator is widely used for upgrading or concentrating material containing a very high percentage of magnetic or where magnetic/mechanical agitation is required for the separation of many difficult materials. Concentrator Magnetic Separator or Permanent Magnetic Separator is ideal for the upgrading of sponge iron/cast iron borings, steel/brass/aluminium turnings, chips and for mineral beneficiation applications such as the purification of dry ceramic and refractory materials, reclamation of abrasive grains, removal of iron contamination from chemical powders and PERMANENT MAGNETIC CONCENTRATOR grains and for many other such applications requiring maximum separation with a minimum product loss. The Concentrator Magnetic Separators can be purchased in various technical specifications from us
-
MAGNETIC EQUIPMENT
Drum Type Magnetic Separator
Magnetic Drum Separators are of self-cleaning type and provide continuous removal of ferrous contamination from a wide range of free-flowing bulk and granular materials in high-volume applications. Drums can be ordered with or without housing. agnetic Drum Separator system is a complete machine with Stainless Steel 304 / 316 Housing & Drive system. Only drum separator unit can also be supplied. The Drum Separators are available in two types:
High Intensity – (Ndfeb Magnet– 4500 gauss), for Operating Temperature of 80°C(Max.)
Low Intensity – (Ferrite Magnet -1200 gauss), for Operating Temperature of 250°C(Max.)
Ferrous fine particles, nuts, bolts, pins, nails and other tramp metal from free-flowing granular material can be arrested effectively. -
MAGNETIC EQUIPMENT
MAGNETIC PULLEY
( Permanent Magnetic Version)
Magnetic Pulley operates as head pulleys on Belt Conveyors. These low cost, self-cleaning magnets remove tramp iron and purify materials conveyed in bulk forms. When material carried on a conveyor enters the magnetic field surrounding the Magnetic Pulley, pieces of ferrous metal in the material are attracted to the Belt. They are held magnetically against the Belt until carried to the underside of the Pulley, where the Belt takes them away from the magnetic field to be discharged. Non- magnetic material falls away from the Pulley in a normal trajectory. Separation is automatic -
MAGNETIC EQUIPMENT
ROTARY CLEAN FLOW MAGNETS
Designed to remove iron contaminated impurities from powders and granulates. The magnets, axially magnetised permanent magnet rings, are assembled into magnetic rods.
The magnets are insulated from the outside by a thin wall stainless steel cylinder. The rods are mounted on base plates in a staggered manner and the rotation of such a cage arrangement improves the flow through a pipe.
Cleaning is easily performed by retraction of the magnetic rods from the stainless steel casing. Used predominantly in the foodstuffs industry. You can see on the video the operation principle and easy cleaning of Cleanflow magnet with rotation magnetic bars, for avoiding metal pollution in your product. It is available also in a hygienic and hydro formed housing. It is especially used in the baby food and the dairy industry.
