Tubular Vibrating feeders

The Matech Tubular Vibrating feeders are suitable for handling and dosing of free flowing bulk material. Tubular vibrating feeders are used to bulk materials or powders and fine sand

They are particularly advantageous in different dosing functions, such as: feeding of big-bags, weighers, conveyor belts, crushers, etc… They can be used in load preparation, or in continuous feeding.

Especially when the conveying process has to be dust free, tubular vibrating feeders are an ideal solution due to their closed design.

Options: machines hanged up or set on the floor, axial outlet tube, or tube fitted with several inputs, tubes of sheet steel resistant to wear, corrosion, acids

Advantages :
– Complete sealing of the conveying tube.
– Dusty products can be conveyed (product with high percentage of fine dust).
– Conveying under pressure or in vacuum conditions, in protected atmosphere…
– Regular capacity quantity that can be adjustable continuously by potentiometer.
– Capacity can be set or automatically controlled by the mean of a SINEX electronic regulation or by analog setpoint 4-20 mA or 0-10 V depending on various parameters.
– Possibility to fit amplitude sensors.

Low power consumption, no moving parts, so, no maintenance.

Matech  Equipments Pvt. Ltd. had developed one of the best tubular vibratory feeder used to transfer the material safely from the feed hopper to the perfect destination.

It is the most prominent product that helps to transfer material like dusty, abrasive, messy and dangerous substance from one point to another point safely. As per the client requirement we manufactures in both round and square section.

Due the symmetrical pipes our tubular vibratory feeder has inclined impact surface at the inlet, that helps the materials to accelerated in the conveying direction immediately.

Applications:

• Mineral Processing
• Building Material
• Chemical Industries
• Mining Industry

Salient Features:

• Low Maintenance
• High Efficiency
• Low Power Consumption

Advantages & benefits

Wide range of applications:

• Dustproof
• Food suitable  construction
• Driven by magnetic vibrator/s or unbalanced motor/s
• Long distances possible due to serial connection of feeders possible (conveyor lines)
• Multiple drive possible (magnetic vibrators)
• Overhead drive position possible
• Variants available for reversing machines
• Separate replacement of tube body or drive traverse (clamp version)
• Made of mild steel or stainless steel

 Construction

Vibrating Tubalare feeders are characterized by their simple design. The main components are:

• Feeding tube with a drive beam, either welded or connected by clamping saddle
• Drive (magnetic vibrator/s or unbalanced motor/s)
• Inlet / outlet nozzles
• Elastically supports
• Flexible sealing

 Selection

The sizing is dependent on:

• Product to transport
• Throughput
• Required geometry
• Possible installation

 Key figures

• Length: up to 9,000 mm for single machines, theoretically unlimited for conveyor lines
• Diameters: 219 mm, 273 mm, 324 mm, 406 mm as standard, other diameters possible
• Throughput: up to approximately 100 m3/h
• Drives: magnetic vibrator or unbalanced motor/s

Tubular Vibrating feeders are suitable for handling and dosing of free flowing bulk material with a max. grain size of 1/3 of the tube diameter. Especially when the conveying process has to be dust free, tubular vibrating feeders are an ideal solution due to their closed design, which also provides high standards of hygiene and cleanliness. For feeding poisonous and hazardous substances, vibrating tube conveyors / feeders are the industries preferred solution.

Advantages & benefits

Wide range of applications:

• Dustproof
• Food suitable  construction
• Driven by magnetic vibrator/s or unbalanced motor/s
• Long distances possible due to serial connection of feeders possible (conveyor lines)
• Multiple drive possible (magnetic vibrators)
• Overhead drive position possible
• Variants available for reversing machines
• Separate replacement of tube body or drive traverse (clamp version)
• Made of mild steel or stainless steel

 Construction

Vibrating Tubular feeders are characterized by their simple design. The main components are:

• Feeding tube with a drive beam, either welded or connected by clamping saddle
• Drive (magnetic vibrator/s or unbalanced motor/s)
• Inlet / outlet nozzles
• Elastically supports
• Flexible sealing

 Selection

The sizing is dependent on:

• Product to transport
• Throughput
• Required geometry
• Possible installation

 Key figures

• Length: up to 9,000 mm for single machines, theoretically unlimited for conveyor lines
• Diameters: 219 mm, 273 mm, 324 mm, 406 mm as standard, other diameters possible
• Throughput: up to approximately 100 m3/h
• Drives: magnetic vibrator or unbalanced motor/s